3d printed tree root, Flashforge pro

Printed the tree root. With 

support. The printed root bottom look ragged. The rest look good and smooth.

2 color frog , 3d print duel color. Flashforge pro

Slicer - Simplified3d. Printed without support. The ooze shield auto. When select duel extruder printing.
As you can see . after printed the ooze shield cover the frog but not touching it. The ooze is easily removed, look like a shed skin.

Test print new filament from china

ABS filament print turn out great. Filament dia. 1.62mm when measure. But my print setting was 1.75mm. 3D printer used Flashforge Pro

Dual extruder or 2 color 3d printing

Test out dual color printing. Look good.

Built tak on glass pane

Paste built tak on glass pane and attached to built platform. I used simplified3d slicer. All the 3 printed model  stick to the built tak without fail.

Glass pane on 3d printed platform

For my experience when using clip. If your print is too huge the extruder will hit the clip. It happen once. So I just place the glass pane on the platform and used blue painter tape on all 4 side. It works well. If you own a dual extruder 3d printer consider the tape option. Happy printing.

Add glass to built platform for flashforge pro 3d printer

A step-up structure was printed. To place on to the Z Axis as a stopper. So the Z Axis will not over shoot because of the glass pane on the printed platform.

Skeleton fish 3d printed with Flash Forge Pro

Cool skeleton. Fish. All joints are moveable. Can be used for key chain. Material ABS. Printer Flash Forge Pro